Sustainability

Products that last start in the design.

We stay with a product from first sketch through tooling and production. That's where a product's durability gets decided.

From Alex

Why this page exists.

Alex Nagel, founder of ANCORD, in a tan t-shirt against a dark studio backdrop

I founded ANCORD in Victoria in January 2018. From the start we agreed the studio would do everything in its power not to add to the pile of products that end up in a landfill.

A decision made in CAD repeats on every unit that comes off the line, so we try to catch the expensive ones before tooling.

This page is our record of that: what we do on projects, what we've committed to as a business, and what we're working on next. We'll update it every year and keep the old versions.

Alex Nagel's signature
Alex Nagel
Founder / CEO

What we believe

Three questions before we take a project.

Option A · Tap a card and the answer covers its photo

Option B · One control opens all three answers together

Option C · Hover on desktop or tap on a phone, and the card slides up to show the answer

“In the end, we will conserve only what we love.”Baba Dioum, conservationist, quoted in our guiding principles

Read the full principles post →

How we design

Where durability gets decided.

Much of a product's footprint is decided after concept, in tooling and at the factory, so we stay through production.

From research to end of life

See every stage as a list

    Our commitments

    What we do, since when, and how to check.

    Pick an area. Status as of November 2026.

    We're also working on a carbon baseline (target: end of 2027), a climate pledge, a repair checklist and more. They're under What we're working on.

    Hands holding prototype parts over a cutting mat laid out with material samples
    Black prototype parts and calipers beside a product sketch
    A ski helmet handed across the table during a design review

    For your product

    Bringing this to your product.

    Every project starts with how the product will be used, repaired and replaced. Here's where that shows up in the three ways we work.

    Five questions about your product

    A quick self-check. Nothing is sent anywhere.

    For BC Green Business members · from January 2027

    A complimentary 45-minute product sustainability or DFM review call, and 10% off a first Design Research sprint or Consulting block.

    For Indigenous entrepreneurs · one a month

    A donated 60-minute founder session with Alex, on your product, design or business. Book a session →

    We also give talks and workshops on sustainable design and design for repair, for teams, cohorts and events. Invite Alex to speak →

    In the work

    What it looks like on a product.

    Render of riding gear drying on a GRBX bin in a garage

    GRBX · Gear Reset System

    Fewer parts, one system.

    • 18 parts across one bin and four kits, consolidated from over 20.
    • The kits lock in on a dovetail cut from the moulding's draft angle, with no extra part.
    • Tested on every iteration; the IDEA 2026 judges called out "the amount of testing and development behind the final design."
    Read about the IDEA win →

    In their words

    What people say about how we work.

    Our record

    Certified, recognized, dated.

    The 2026 Ecostar Circular Champion award, a wooden block with a white mountain ridge, held in a handEcostar 2026 · Circular Champion
    Render of the GRBX bin drying riding gear in a garageIDEA 2026 · Product Design, for GRBX
    Alex Nagel sketching in a notebook on a sunny bluff above the forest on Galiano IslandBC Green Business · certified since 2023
    Since 2023
    BC Green Business

    Certified Green in 2023 (36 points) and 2024 (38 points), then Green Leader and Water Friendly Business in 2025 with 42 points. Green Leader is awarded after three or more consecutive years certified Green; the 2025 certification runs for two years. Run by the Synergy Foundation.

    Nov 2026
    2026 Ecostar Awards

    Winner, Circular Champion, from three finalists.

    Nov 2026
    Island Design Excellence Awards

    Winner, Product Design, and Honourable Mention, Graphic Design, for GRBX.

    Since Jun 2023
    Surfrider Foundation Canada

    Monthly corporate member.

    Since Oct 2024
    Apr 2024
    Victoria Hand Project

    We donated our old 3D printer to the Victoria charity.

    156 kgwaste diverted
    537 m³water saved
    44,276 kWhenergy conserved
    134 hrspaid volunteer time

    Calculated by BC Green Business for ANCORD since we joined the program in 2023. Source: our BC Green Business environmental metrics, February 2026.

    What earned the score

    Each item below was verified by BC Green Business, most of them every year since 2023.

    Energy
    • LED lighting throughout the office
    • ENERGY STAR computers, printers and kitchen appliances
    • Heat set back to 16°C when the office is empty
    • Computers off at night and on weekends
    Waste
    • Composting since September 2023, now a shared kitchen bin
    • Soft plastics, pens, batteries and electronics recycled
    • Paperless invoices, files and statements
    • Reusable dishware, no disposables
    Water
    • Low-flow faucets and toilets
    • Tap water, no bottled water
    Getting around
    • At least half the team bikes, walks or takes transit
    • Remote work at least one day a week
    • Video calls in place of travel
    • Offsets bought for business flights
    Purchasing
    • A written sustainable purchasing policy since August 2023
    • No single-use items for staff or visitors
    • A quarter or more of our furniture used or recycled
    People and community
    • Volunteer time for the team every year, about 50 hours at Design Victoria in 2025
    • 40 to 50 free consults a year for inventors and startups
    • Our old 3D printer donated to the Victoria Hand Project
    • Compost and recycling set up for our whole shared office

      In progress

      What we're working on.

      We treat sustainability as work that keeps going. These are the goals we're working toward now, with a date wherever we've set one.

      Target: end of 2027Measure our carbon baseline.BC Green Business already tracks our waste, water and energy. Next is a full carbon baseline for the studio, published here with a reduction target.
      After the baselineChoose a climate pledge.Once we can measure our emissions, we'll choose a pledge we can report against every year.
      In progressWrite our repair checklist.Our five practices guide every project. A written checklist, run at concept freeze and before tooling, makes them a fixed step.
      In progressAudit our office waste.We're running a waste audit for our shared office, to see what's still going to landfill and what we can cut next.
      In progressGreener supplies for the whole office.Refill-first cleaning products and 100% recycled paper across the shared office, as the current stock runs out.
      OngoingAct on reconciliation.Working toward Call to Action #92 of the Truth and Reconciliation Commission: regular learning for the team, buying from Indigenous-owned businesses, and one donated founder session a month for Indigenous entrepreneurs. Book a session →
      Last updated
      November 2026

      Questions we get.

      Short answers on certification, design for repair, cost and what's next.

      Is ANCORD a certified green business?

      Yes. We've been BC Green Business certified since 2023. We hold Green Leader status, which recognizes three or more consecutive years certified Green, and we're a Water Friendly Business.See our member page

      How does sustainability come into a project?

      From the first conversation. We start with how the product will be used, repaired and replaced, and carry those decisions through tooling and production.

      Is sustainable design more expensive?

      Not necessarily. Most of the decisions are made in CAD, before tooling. What costs money is changing course after the moulds are cut.

      What's the biggest sustainability win in product design?

      Durability. A product that lasts longer spreads its material, manufacturing energy, shipping and waste over more years of use. Repairability and recyclable materials come next.

      Is ANCORD measuring its carbon footprint?

      We're working on it. BC Green Business already tracks our waste, water and energy, and our target is a full carbon baseline for the studio by the end of 2027. When it's done, it goes on this page with a reduction target, and a climate pledge follows from there.

      Keep exploring

      Detail render of a black pet bowl product against a dark background.

      Work

      Highlight reel

      Products for startups and global brands, from research to production.

      The ANCORD team working through prototypes around a table in the studio.

      Blog

      The drawing board

      What happens below deck at a product design studio.

      Have a product in mind? We'd like to hear about it. A short note is plenty, and we'll suggest a time to talk.